Electric Wheelchairs

Electric Wheelchair

For more information please don't hesitate to contact us

  +351 911 117 085 (Call now)

The electric wheelchair has a design focused on comfort where we can highlight:

Front basket that allows you to place any object that the user takes with him, allowing him to have complete freedom in his arms to drive.
Adjustable handlebar in 3 positions.
Swivel folding seat adjustable 360º in 6 positions using the seat rotation lever and adjustable in 3 fixed heights with 2 cm difference between them.
Armrests folding and adjustable in width and inclination.
Wheelchair dimensions and weight for the disabled:
Total length: 100 cm without basket.
Total length: 112 cm with basket.
Overall Width: 51cm
Total height: 89 cm
Distance to the floor: 3.5 cm
Weight with batteries: 40 kg
Battery weight: 9.2 kg
Maximum supported weight: 115 kg
Chair wheels with electric motor:
Front and rear wheels: 19.5 cm diameter
Anti-puncture solid wheels.

The seat of the chair for the electrically handicapped:

Seat Type: Folding Cushion.
Seat Width: 42.5cm
Swivel folding seat adjustable 360º in 6 positions using the seat rotation lever and adjustable in 3 fixed heights with 2 cm difference between them.
Technical characteristics of the Virgo wheelchair for the disabled:
Motor: 250W 4700 r.p.m.
Maximum speed: 6.4 km/h
Max ascent slope: 8 degrees
Rise camber: 35mm / 1.4
Turning Radius: 127 cm
It has a horn.
It has 2 rear reflectors that will allow you to be seen at night.
Electromagnetic brake: stop the scooter when you stop pressing the accelerator.
Electronics: On/Off switch, battery level indicator, speed control command.
Electric wheelchair battery:
Gel battery: (2) 12V .12Ah Rechargeable and removable for easy transport.
Autonomy: 10 km (indicative, in a straight line, according to the user's weight).
Battery charger: 1.8A outside the vehicle.
* To conserve battery life, we recommend charging the batteries when the indicator shows a low level without waiting for the battery to run out, and always fully charging the battery.

Steps to connect the electric chair for the disabled:

Remove the screw located next to the charger connector and press the button.
Connect the charger and charge the battery for 8 hours. Battery varies depending on use.
Disconnect the charger.
Put the rear lever in automatic mode.
Insert and turn the key to start the scooter.
Place the speed booster in the middle of the wheel, between the turtle speed and the hare speed.
Accelerate the scooter carefully using the steering wheel levers.
We recommend an electric mobility wheelchair due to:
Your neutral lever: disables the scooter's traction and braking systems, allowing someone else to push you.
Its forward and reverse gear: with the option of steering it with just one hand.
Its driving system: adaptable to the user, whether he is right-handed or left-handed.